Shall be in accordance with ASME Y14.3M.

Shall be in accordance with ASME Y14.3M.

Figure 13 illustrates proper line projection. Fillets and rounds may be projected as phantom lines per ASME Y14.3M and no lines per ASME Y14.8M.

rawn by showing only half the object (see ASME Y14.3M). Dimensions from the line of symmetry include an arrow at the line of symmetry.

ablishes the requirements for Multiview and Sectional view drawings. The topics covered are: a) Third angle projection b) First angle projection c) Standard arrangement of six principal views d) Projection symbols e) Views f) Detail views g) Section views h) Drafting Conventions.

company is likely to encounter such a situation. The angle of projection symbol is placed near the title block. See Figure 3.2-4. The location used should be consistent within a company.

rojection is being used. See Figure 3.2-11. The block is generally aligned with other blocks and is drawn to the same width as the adjacent block. The height is approximately 27 mm on A0 and A1 sheet sizes. It is approximately 15 mm for A2, A3, and A4 sheet sizes. The projection symbol is drawn in accordance with ASME Y14.3M. A note indicating the angle of projection may be placed above the angle of projection symbol.